Stainless Steel 1.5 Bowl Sink

The Stainless Steel 1.5 Bowl Sink is a stainless steel kitchen sink that is installed above the countertop. Measuring approximately 1000×500×220 mm, it consists of two square basins (one large and one small) and an integrated drain surface. The clean lines and brushed finish create a sleek and modern look. The 220 mm depth prevents water from splashing out, and the smooth drainage system keeps the countertop clean during use.

Stainless Steel 1.5 Bowl Sink Parameters:

Stainless Steel 1.5 Bowl Sink Features:

1. Ample Large Bowl Capacity

The Stainless Steel 1.5 Bowl Sink measures approximately 400×380×220 mm, with a geometric volume of about 33 liters and an effective capacity of around 30 liters, easily accommodating multiple pots and pans and large dishes at once.

2. Separate Washing Sink

The smaller sink measures approximately 330×180×170 mm, with a geometric volume of about 10 liters, ideal for separately washing fruits and vegetables or small amounts of tableware. This saves water and prevents mixing with grease in the larger sink, achieving clear separation and a higher level of hygiene.

3. Standard Size

The overall dimensions are 1000×500×220 mm, compatible with most standard cabinet layouts and a countertop depth of 600 mm. This allows cabinet manufacturers to use uniform dimensions when cutting holes in the panels, improving installation efficiency and significantly reducing the error rate of secondary cutting.

4. Fine Brushed Surface

The sink features a fine brushed finish with uniform brushing direction and a roughness controlled within the recommended range for standard kitchen sinks. This reduces the visibility of water stains and scratches while facilitating daily cleaning. Compared to a mirror finish, the brushed surface reflects less light under strong illumination, significantly reducing visible bright spots and improving eye comfort during prolonged use.

5. Anti-Condensation Structure

The sink's outer wall is covered with an anti-condensation coating, which, combined with a bottom shock-absorbing layer, reduces condensation caused by temperature differences in cold water environments. This reduces water droplet accumulation at the bottom, helping to prevent prolonged dampness on the cabinet base, extending the cabinet's lifespan, and reducing the frequency of maintenance for the user.

Stainless Steel 1.5 Bowl Sink Application:

1. Residential Open Kitchens

The Stainless Steel 1.5 Bowl Sink is ideal for open-plan or linear kitchens. Its 1000mm length provides a complete washing area without taking up all countertop depth, making it suitable for homes between 80 and 120 square meters.

2. Apartment Kitchen Cabinets

For apartment projects, developers can use this sink size uniformly. Bulk purchases with the same cutout size significantly reduce on-site installation time, keeping installation for each kitchen within tens of minutes, thus shortening the overall delivery cycle.

3. Restaurant Food Preparation Areas

In small to medium-sized restaurant kitchens, the large basin of this sink allows for centralized rinsing, while the 170mm deep basin is suitable for temporarily soaking ingredients or tools. With proper arrangement, it can create a separate washing and drying area within limited countertop space, helping kitchen staff follow cleanliness procedures and reducing the risk of cross-contamination.

4. Office Tea Room

In office building tea rooms, 1000×500 mm stainless steel recessed sinks can be matched with standard 600 mm deep artificial stone or quartz countertops, meeting the cleaning needs of multiple users. The double-sink structure allows employees to wash their personal cups and communal tableware separately, improving overall hygiene management.

5. Rental Apartment Renovation

In old building or rental apartment renovation projects, recessed installation eliminates the need for extensive removal of the original countertop; simply drilling a 1000×500 mm hole allows for quick replacement of the existing sink.

Stainless Steel 1.5 Bowl Sink FAQs:

Q: What size hole needs to be cut in the countertop to install this sink?

A: We recommend pre-cutting a hole approximately 10-15 mm smaller than the outer diameter of the sink's overall dimensions (1000 x 500 mm). The exact size can be slightly adjusted based on the actual countertop material to ensure a secure edge seal and allow sufficient space for sealant.

Q: Are the drain fittings for this double sink included with the product?

A: This Stainless Top Mount Kitchen Sink comes standard with two drain sets and connecting pipes, along with an overflow outlet, fixing clips, and other basic accessories. Users do not need to purchase additional main components during installation; simply adjust the angle and length according to the drainage location to complete the connection.

Q: What countertop thickness is this sink suitable for?

A: We generally recommend using stone or slab countertops with a thickness between 25 and 40 mm. Within this range, the countertop provides good pressure against the sink's edges and can withstand the sink's weight and normal usage loads. During installation, necessary support structures should be used under the countertop to ensure stability.

Q: Is the brushed surface prone to trapping dirt and difficult to clean?

A: The brushed stainless steel surface uses a controlled, shallow texture. Water stains and oil can be easily removed with a neutral detergent and a soft cloth, wiping along the grain. Avoid using hard tools like steel wool to maintain the original brushed texture and extend its lifespan.

Q: Will the sink produce noticeable noise or condensation?

A: The sink's outer wall has an anti-condensation coating and noise-reducing treatment, effectively reducing metallic resonance noise from water flow. Under normal household water pressure conditions, the noise level remains within a comfortable range. It also prevents large areas of condensation from forming at the bottom, reducing moisture inside the cabinet. However, it's still important to keep the cabinet well-ventilated and dry when necessary.