Green Stainless Steel Kitchen Base Cabinets
Stainless Steel Kitchen Base Cabinets is a high-end storage solution designed for modern kitchens. Made of 304 stainless steel, the base cabinets come in standard sizes of 4000mm wide, 810mm high and 600mm deep. They can also be customized to suit different kitchen layouts. The green coating on the surface is both beautiful and practical. The base cabinets are simple and modern with smooth lines, suitable for all kitchen decoration styles.
stainless steel kitchen Base Cabinets Features:
1. High-quality stainless steel material
Stainless Steel Kitchen Base Cabinets are made of 304 stainless steel, whose main components include 18% chromium and 8% nickel. This material has excellent corrosion resistance and can resist the erosion of a variety of chemicals, such as common acid and alkali environments. In the salt spray test, 304 stainless steel can remain rust-free for 720 hours, with only slight white rust; in the acetate spray test, it can last for 360 hours without rust. Its tensile strength can reach 520-760MPa, yield strength is 205MPa, and elongation is about 40%. These mechanical performance indicators show that it has good strength and toughness and can withstand frequent use and heavy pressure in the kitchen. Its density is 7.93g/cm³, which ensures that the product will not increase the burden on the kitchen due to excessive weight while remaining sturdy.
2. Reasonable partition design
The interior of the base cabinet adopts a reasonable partition design to optimize the storage space layout. The standard configuration includes adjustable shelves, drawers and storage compartments. The shelf spacing can be flexibly adjusted between 100-300 mm, the drawer depth is 150-250 mm, and the storage compartment size is 100×100×100 mm. This design allows kitchen supplies to be stored in categories, such as pots, tableware, condiments, etc., which are easy to access and not easy to confuse. Compared with traditional wooden base cabinets, its internal space utilization rate has increased by about 25%, and it can store about 20% more kitchen supplies. Reasonable partition design not only improves storage efficiency, but also keeps the kitchen tidy and orderly.
3. Fine surface treatment
The product surface adopts multiple fine treatment processes. The first is mechanical polishing, using fine grinding materials to reduce the surface roughness to less than Ra0.2μm to achieve a mirror-like smooth effect. Then a chemical passivation treatment is carried out, and a dense chromium-rich oxide protective film is generated on the stainless steel surface through a specific chemical solution. The thickness of this film is controlled between 0.5-2μm, which can effectively improve the corrosion resistance of the product. Finally, a special coating treatment is applied, using a nano-level transparent coating with a coating thickness of about 10-20nm, which not only further enhances the surface hardness, but also gives the product anti-fingerprint function. After these treatments, the surface has about 80% less fingerprint residue in daily use, making cleaning and maintenance more convenient, while maintaining the original metallic texture and gloss of the stainless steel material.
4. Excellent durability
The 304 stainless steel material gives the base cabinet excellent durability. Its service life can reach 15-20 years, which is much higher than the 5-8 years of traditional wooden base cabinets. Under frequent use, such as opening and closing cabinet doors and drawers 20-30 times a day, the base cabinet can still maintain good working condition. The sturdiness of stainless steel can withstand the pressure of heavy objects, and the standard load can reach 100 kg/layer, ensuring the safety of stored items. Compared with wooden base cabinets, it is not easy to deform, crack or damage, and can maintain stability and beauty in long-term use, providing reliable storage support for the kitchen.
5. Strong corrosion resistance
Stainless Steel Kitchen Base Cabinets have strong corrosion resistance. The 304 stainless steel material enables it to resist common corrosive substances in the kitchen, such as detergents, disinfectants and food residues. In actual use, after the surface of the base cabinet is exposed to detergents (such as chlorine-containing detergents with a concentration of 500-1000mg/L), there is no obvious corrosion or discoloration after 72 hours of observation. Its corrosion resistance ensures that the base cabinet will not rust or deform in a humid kitchen environment for a long time, and always maintains a good appearance and function, providing users with more lasting use value.
6. Precise size customization
Provide comprehensive size customization services, and its width, height and depth can be adjusted within a reasonable range according to user needs. The minimum custom size is 1000 mm × 600 mm × 300 mm, and the maximum can reach 5000 mm × 1000 mm × 800 mm. During the customization process, through precision CNC processing equipment, the dimensional tolerance is controlled within ±1mm to ensure the precise match between the product and the kitchen space. This flexibility allows the product to adapt to a variety of different building structures and kitchen layouts, whether it is a small apartment or a large villa, you can find a suitable size solution. Its modular design concept also allows multiple units to be combined and spliced to form a large kitchen system to meet the storage needs of large-scale kitchens.
7. Excellent environmental performance
The 304 stainless steel material gives the base cabinet excellent environmental performance. Its production process meets international environmental standards, is non-toxic and harmless, and does not pollute the environment. The material can be recycled at a rate of more than 90%. After the product life cycle, its main structure and accessories can be recycled to reduce the impact on the environment. Compared with wooden base cabinets, stainless steel base cabinets do not require a large amount of glue and paint during the production process, avoiding the release of harmful substances such as formaldehyde. During use, its surface is smooth and non-porous, and it is not easy to breed bacteria and mold, which reduces the use of detergents and further reduces pollution to the environment.
8. Comprehensive safety guarantee
Safety factors are fully considered in the design. The corners of the base cabinet are rounded to avoid the risk of collision injuries caused by sharp corners to kitchen staff and family members. All fasteners are installed in a built-in style, with no exposed screws on the surface, to prevent clothing or body parts from being caught. Anti-skid pads are installed at the bottom of the base cabinet, with a size of 50×50 mm and a thickness of 10 mm, to effectively prevent the base cabinet from sliding during use. Its stable structural design ensures that the base cabinet will not tip over when carrying heavy objects. After testing, the base cabinet has good stability when carrying a weight of 150 kg, without tipping or deformation. These safety design details provide a safer living environment for family members and reduce the risk of accidents in kitchen operations.
Stainless Steel Kitchen Base Cabinets Application:
1. High-end residential kitchens
In high-end residential kitchens, Stainless Steel Kitchen Base Cabinets are an ideal choice for improving kitchen quality and quality of life. Its 304 stainless steel material and green coating design not only meet the aesthetic needs of modern kitchens, but also provide ample storage space. The standard size is 4000 mm wide × 810 mm high × 600 mm deep, which can meet the storage needs of daily kitchen supplies in the family. In actual application, the utilization rate of kitchen storage space has increased by about 30%, and the cleanliness of the kitchen has been significantly improved. Its durability and corrosion resistance ensure that the base cabinet will not rust or deform in the home environment for a long time, and always maintain a good appearance and function, providing a beautiful, practical and safe kitchen environment for family members.
2. Hotel kitchen matching
For hotel kitchens, Stainless Steel Kitchen Base Cabinets are important equipment for efficient kitchen management. Its modular design and precise size customization capabilities enable the base cabinet to seamlessly connect with other kitchen equipment (such as stoves, dishwashers, refrigeration equipment, etc.) to form an efficient workflow. By customizing base cabinets of different sizes and functions, hotels can create exclusive kitchen systems based on their own food characteristics and operating models. After the international hotel chain fully adopted the base cabinets in the newly built central kitchen, the kitchen space utilization rate increased by about 25% and the equipment maintenance cost decreased by about 20%. Its sturdy and durable 304 stainless steel material can withstand the high-intensity use frequency of hotel kitchens. It can still maintain good working condition after an average of 10-12 hours of daily use, and its service life can reach more than 15 years, providing hotels with long-term and reliable kitchen solutions.
3. Corporate canteen kitchen
In corporate canteen kitchens, Stainless Steel Kitchen Base Cabinets can effectively improve the storage capacity and operating efficiency of the kitchen. Its reasonable internal partition design and large-capacity storage space can meet the storage needs of a large number of kitchen utensils and tableware in corporate canteens, ensuring that the kitchen is neat and orderly. After the actual transformation, the storage capacity of kitchen items increased by about 25%. At the same time, due to the durability of stainless steel, the service life of the base cabinet was extended by about 5-8 years, reducing the equipment renewal cost of the enterprise. Its environmental performance also meets the company's requirements for green buildings, providing employees with a healthy and hygienic dining environment.
4. Food processing in school kitchens
In the food processing area of school kitchens, Stainless Steel Kitchen Base Cabinets are important equipment to ensure food hygiene and safety. Its odorless and non-permeable characteristics can effectively prevent food contamination and ensure the health of students' diet. The partition design of the base cabinet allows food processing tools and ingredients to be stored in categories to avoid cross contamination. After the school introduced this type of base cabinet, the pass rate of sanitation inspections during food processing increased to 100%, and the food processing efficiency increased by about 35%. Its sturdy and durable 304 stainless steel material can withstand the high-intensity use frequency of school kitchens. It can still maintain good working condition after an average of 8-10 hours of daily use, and its service life can reach more than 15 years, providing schools with long-term and reliable kitchen solutions.
5. Special needs of hospital kitchens
In the hospital kitchen environment, Stainless Steel Kitchen Base Cabinets can meet its special requirements for hygiene and safety. Its rounded corner design and built-in fasteners effectively eliminate sharp corners and exposed screws, reducing the risk of collisions and hooking accidents between medical staff and patients in the kitchen. The design of the non-slip foot pad ensures the stability of the base cabinet during use and prevents accidents caused by sliding. In actual application, after the hospital's nutrition restaurant kitchen adopted this base cabinet, the accident rate in the workplace was reduced by about 55%, and the loss of medicines and medical equipment was reduced by about 30%. Its easy-to-clean surface and antibacterial properties meet the hospital's hygiene standards and provide patients with safe and hygienic catering services.
6. Luxury Cruise Ship Kitchen Facilities
In luxury cruise ship kitchens, Stainless Steel Kitchen Base Cabinets are an ideal choice for creating efficient and beautiful kitchen facilities. Its green appearance and modern and simple design style blend with the overall decoration atmosphere of the cruise ship, providing passengers and crew with a pleasant visual experience. In terms of space utilization, its precise size customization capability can make full use of the limited space resources of the cruise ship, such as customizing a compact floor cabinet combination in a small cabin kitchen, or creating a multi-functional operating area in a large restaurant kitchen. In actual application, luxury cruise companies installed this base cabinet on their newly built cruise ships, which increased the kitchen space utilization by about 28% and the kitchen cleaning and maintenance efficiency by about 35%. At the same time, its durable stainless steel material can withstand the high humidity and salt spray erosion of the marine environment, ensuring that the kitchen facilities remain in good working condition during long sea voyages and providing passengers with high-quality catering services.
Stainless Steel Kitchen Base Cabinets Maintenance:
1. Daily cleaning process
After using the kitchen every day, the Stainless Steel Kitchen Base Cabinets should be wiped thoroughly with warm water and neutral detergent, focusing on cleaning the inside and outside of the cabinet doors, drawers and shelves. Use a soft microfiber cleaning cloth to wipe the surface in a spiral pattern to ensure that the detergent covers all areas. For areas with heavy oil stains, the detergent concentration can be appropriately increased, but it is necessary to avoid using detergents containing chlorides or strong acids and alkalis to prevent corrosion to the stainless steel surface. After cleaning, rinse the remaining detergent thoroughly with clean water and wipe the surface with a dry soft cloth to avoid water stains. During the cleaning process, avoid using steel wool or abrasive cleaning tools to avoid scratching the surface coating. It is recommended that the cleaning time is no less than 20 minutes each time to ensure that all stains and oil stains are thoroughly removed to keep the kitchen environment hygienic and tidy.
2. Regular deep maintenance
Perform deep maintenance once a week. First, use a professional stainless steel cleaner and dilute it according to the instructions. Use a soft brush to gently brush the surface of the base cabinet, focusing on cleaning corners, slides and hinges. The scrubbing force should be controlled at 1 - 2N/cm² to avoid mechanical damage to the surface. Rinse with plenty of clean water after scrubbing to ensure that the residual amount of detergent is less than 0.1mg/m². Then polish it with a professional stainless steel polishing agent and a polishing wheel. The polishing area should not exceed 0.2 square meters each time, and the polishing time should not exceed 2 minutes until the surface regains its gloss. Finally, perform protective treatment. Use stainless steel protective wax and apply it evenly on the surface with a clean soft cloth. The thickness should be controlled at 0.05 - 0.1mm. After it dries naturally, wipe it with a dry cloth to form a protective film to enhance the corrosion resistance and anti-fingerprint performance of the surface. The deep maintenance process should be carried out during the non-operating hours of the kitchen to ensure that the maintenance work does not affect the normal operation of the kitchen.
3. Slide rail and hinge maintenance
Perform special maintenance on the slide rails and hinges of the base cabinet once a month. Use compressed air to blow away dust and oil on the surface and inside of the slide rail, and then wipe the sliding part of the slide rail with a cotton swab slightly dipped in oil to ensure that the oil film is evenly covered. For hinges, use a lubricating oil gun to inject an appropriate amount of lithium-based grease. The injection amount for each lubrication point is about 3-5 grams. After lubrication, manually open and close the cabinet door 10-15 times to ensure that the hinge moves freely. Check the load-bearing performance of the slide rail. The standard slide rail can bear 15 kg, and the heavy-duty slide rail can bear 30 kg. If there is a jam or insufficient load-bearing, the slide rail should be replaced in time. Check the fastening screws of the hinge regularly. If there is any looseness, tighten it in time to ensure that the cabinet door is tightly closed and the gap is uniform. Generally, the gap between the cabinet door and the cabinet body should be controlled within 1-2 mm. Maintenance work should be carried out after the kitchen is stopped from use to avoid the influence of oil and dust on the lubrication effect, ensure the long-term stable operation of the slide rail and hinge, and extend its service life.
4. Surface scratch repair
Inspect and repair surface scratches once a quarter. Use a professional stainless steel scratch repair agent and follow the product instructions. First, gently polish the scratch area with fine sandpaper to remove surface burrs and oxide layers, and then clean the polished area with a detergent to ensure that the surface is clean and dust-free. Apply the repair agent evenly to the scratch, with a thickness of 0.1-0.2 mm, and use a scraper to scrape the repair agent so that it is flush with the surrounding surface. After the repair agent is initially cured, polish it with a polishing agent and a polishing wheel to restore the surface gloss. For deep scratches, it is recommended to be handled by professional maintenance personnel to avoid self-repair and the expansion of surface damage. The repaired surface should be consistent with the original surface color and gloss, without obvious marks, to ensure the beauty and integrity of the base cabinet. Scratch repair work should be carried out after the kitchen is cleaned to avoid dust mixing into the repair agent and affecting the repair effect. At the same time, it should be avoided as much as possible to repair in a high temperature and high humidity environment to ensure the curing quality and adhesion of the repair agent.
5. Environmental condition control
Keep the relative humidity of the kitchen environment between 30%-70%, and the temperature within the range of 15-35℃. In high humidity environments, dehumidification equipment should be installed to ensure that the water vapor partial pressure in the air does not exceed 2.3kPa to reduce the risk of corrosion on the stainless steel surface. Avoid long-term exposure of base cabinets to extreme temperature environments. The temperature change rate should be controlled within 5℃/h to prevent changes in internal stress of the material due to thermal expansion and contraction, which will affect the structural stability of the base cabinet. At the same time, avoid using highly volatile chemicals near the base cabinets. The vapor of these substances may react with the stainless steel surface and destroy the surface treatment layer. In special environments, the surface of the base cabinet should be wiped with clean water in time after each use to reduce chemical residues. By installing a kitchen ventilation system to ensure air circulation and timely discharge of harmful gases and moisture, a good use environment for the base cabinet is provided, its service life is extended, and it is ensured that it is always in good working condition.
6. Professional maintenance management
During use, if the Stainless Steel Kitchen Base Cabinets have deep scratches, deformation of the cabinet door, damage to the slide rails and other problems that cannot be repaired by themselves, you should contact professional maintenance personnel in time to deal with them to avoid further damage. During the maintenance process, maintenance personnel should be required to use accessories made of the same material and process as the original product for replacement and repair to ensure that the performance after maintenance is consistent with the original product. It is recommended to sign an annual maintenance contract with a professional maintenance service agency and conduct regular comprehensive inspections and maintenance of the base cabinets. Maintenance personnel should conduct comprehensive inspections at least twice a year, including checking the structural stability of the base cabinets, surface treatment layers, wear of slide rails and hinges, etc., and replace aging accessories in a timely manner. At the same time, establish equipment maintenance files to record the content, time, maintenance personnel and other information of each repair and maintenance. Through data analysis, the maintenance needs of the equipment can be predicted in advance, a reasonable maintenance plan can be formulated, the service life of the equipment can be extended, and the base cabinets can always be in good working condition to provide stable storage support for the kitchen.